Service manual

Appendices 129
-T timeout
-i ip
-n netmask
-R route
-u upload
Any parameter that is not specified remains unchanged. The following parameters are configured
by default for billing.
sxx.authtype none
sxx.protocol billing
sxx.flow none
sxx.dcd 0
sxx.sniff_mode no
Select the -u option to execute the billing_upload_files.sh script. The script presents the following
sequential menu where the upload options may be configured.
# billing_upload_files.sh
Transfer Mode (ftp or scp)[ftp]:
Local Directory[/var/run/DB]:
Remote server IP [192.168.1.101]:
Remote directory [/var/billing]:
User [billing]:
Password [billing]:
Upload Interval in minutes []:
NOTE: Instead of running the -u option, the /etc/billing_up.conf may be configured manually to change the
parameters. If the parameters remain unchanged, the default parameters are uploaded.
NOTE: If the scp transfer mode is selected and there is no defined authentication, the script generates a key and
uploads to the server. The key must be stored on the server with the appropriate configuration.
Execute saveconf and restart the console server to activate the options related to billing upload.