Service manual

112 Cyclades ACS 5000 Advanced Console Server Command Reference Guide
With the EMS service enabled in Windows, configure the console server as console profile to
manage the Windows 2003 server. Windows sends xml tags in the following situations.
• During Windows installation, it sends <channel-switch> with the setup logs.
• During boot, it sends the <machine-info> information.
• When switching channels, it sends the <channel-switch> information.
• During system crash, it sends the <BP> to indicate BreakPoint.
The <machine-info> tag is emitted once by Windows Server during its system boot sequence. This
tag is also emitted as part of the <BP> tag. The following elements are included in <machine-
info> tag.
/baud_rate Specifies the baud rate to be used for redirection. Do not use if remotely
administered output is being disabled. Valid values are: 9600, 19200, 38400,
57600, 115200.
/id line_number Specifies the operating system entry line number in the [operating systems]
section of the Boot.ini file to which the operating system load options are
added. The first line after the [operating systems] section header is 1.
/p password Specifies the password of the user account that is specified in /u.
/port communications_port Specifies the COM port to be used for redirection. Do not use if remotely
administered output is being disabled.
BIOSSET get BIOS settings to determine port
COM1
COM2
COM3
COM4
/s server Specifies the name or IP address of a remote server (do not use backslashes).
The default is the local server.
/u [[domain\]user] Runs the command with the account permissions of the user specified by User
or Domain\User. The default is the permissions of the current logged on user
on the server issuing the command.
Table A.2: Machine Info Tags
Element Description
<guid> It is the GUID that uniquely identifies the server platform. Normally,
this is an SMBIOS provided identification. If no such value is
available, all 0’s GUID string is used. See Example of sample
encoding on page 113.
<name> Is the system name.
Table A.1: EMS Configuration Parameters and Switches (Continued)
Parameter and Switches Description