Service manual

104 Cyclades ACS 5000 Advanced Console Server Command Reference Guide
Current Protection
(Avocent PM PDU
and Cyclades
IPDU)
currentprotection
{status|on|off}
[<IPDU ID>]
Enable or disable current protection. This option is to
prevent the outlets from being turned on, if the current
on the IPDU exceeds the specified threshold.
Syslog
(Avocent PM PDU
and Cyclades
IPDU)
syslog {status|on|off}
[<IPDU ID>]
Enable or disable syslogging and alarm notification.
Version ver [<IPDU ID>] Display the software and hardware version of a single or
all IPDU appliances.
Factory Default factorydefaults [<IPDU ID>] Restore configuration to factory default for a single or all
IPDU appliances.
Reboot reboot [<IPDU ID>] Restart the IPDU applicances in chain.
Restore
(Avocent PM PDU
and Cyclades
IPDU)
restore [<IPDU ID>] Restore the configuration saved in Flash.
Save save [<IPDU ID>] Save the current configuration in Flash.
Alarm Threshold
(Avocent PM PDU
and Cyclades
IPDU)
alarm <IPDU ID>
<threshold>
[<element>]
Set an alarm notification when the current exceeds the
selected threshold.
The <element> can be bank name (A, B, C, XY, ...),
phase name (X, Y, Z), outlet number (1, 2, ..)
IPDU ID id <current IPDU ID>
<new IPDU ID>
Display the current IPDU name or assign a new name.
Display
(Cyclades IPDU)
display [<IPDU ID> {0|180}
[/{I|V}<cycle time>]]
Set the LED display mode of the IPDU.
HW OCP
(Avocent PM PDU
and Cyclades
IPDU)
hwocp [<IPDU ID> [reset]] Display or reset the overcurrent protection status in a
single or all IPDU appliances.
Minimum On Time
(Avocent SPC)
minimumon
<outlet list> [<interval>]
Set the minimum time an outlet stays On before it is
turned Off.
Minimum Off Time
(Avocent SPC)
minimumoff
<outlet list> [<interval>]
Set the minimum time an outlet stays turned Off before it
is turned back On.
Table 6.1: pmMenu and pmCommand Commands (Continued)
Menu Item Command Syntax Description