User guide

Chapter 3: Operations 25

ID Window Settings

Operation Procedure

Move the ID window Use the Arrow keys or mouse to move the ID

window's position on the monitor. If the window

ﬂ ickers but does not move, continue tapping the

Arrow keys until it moves back into range.

Change window background color Press the Page Up key to cycle through the available

window background colors.

Change text color Press the Page Down key to cycle through the

available text colors.

Change window size Use the Plus (+) and Minus (-) keys to change the

length of the ID window.

5. Press Enter to accept the changes.

-or-

Press Escape to exit the menu without saving the changes.

Setting the ID window dwell time

This menu selection lets you set the time that the ID window remains on

screen after a channel switch. Each channel can be configured independently.

The default time is set for five seconds.

To set the ID window dwell time:

1. Press the Control key twice to access the Administrator Channel List.

2. Highlight the channel you wish to change.

3. Press the Control key twice to access the Command Menu.

4. Highlight Channel Maintenance and press Enter.

5. Highlight Dwell Time for ID window. Enter a number between ø-255

seconds. Entering ø disables the ID window. Entering 255 allows the ID

window to stay on screen the entire time the channel is active. Press Enter.

6. Highlight Save Changes and press Enter.