User guide

Chapter 3: Operations 19
To select a channel in the OSD:
1. Use your Up and Down Arrow keys, the Page Up and Down keys or
the mouse to select a channel.
-or-
Press the Home or End key to move directly to the top or bottom of the list.
-or-
Type a letter to move the highlight bar to the first channel name beginning
with that letter. Press the letter repeatedly to scroll through all channels
that begin with that letter from top to bottom.
2. Press Enter.
-or-
Press Escape to exit the Administrator Channel List without changing
channels.
To select servers without displaying the OSD:
1. Press and hold down the Num Lock key. Press and release the Minus (-)
key on the numeric keypad. Now release the Num Lock key. The Command
Line menu appears.
2. Type the channel address of the computer you wish to access.
3. Press Enter.
Setting up the On-Screen Display (OSD)
All commands other than selecting servers are performed from the
Administrator Commands menu. If you are operating in non-secure mode
or are the system administrator, you will have several options that do not
appear in the user level Command Menu. Add Channel, Edit Channel, Delete
Channel and Administrator Functions are all covered in separate sections in
this chapter.