User guide

Chapter 2: Installation 11
Installing the AutoView
The diagram below illustrates one possible configuration for your AutoView
switch. Follow the step-by-step procedure To install an AutoView switch to
properly install your new switch.
Figure 2.2: AutoView Installation Example
WARNING: To reduce the risk of electric shock or damage to your equipment -
- Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
- Disconnect the power from the unit by unplugging the power cord from either the electrical
outlet or the unit.
Local
User
Server A
Servers B-H
DB9 serial port for
updating firmware