User guide

66 AMX Switch Series Installer/User Guide
Managing AMX switch objects with SNMP
Using SNMP, you can monitor and manage MIB (Management Information Base) objects specific
to the AMX switch. Refer to
Table 4.2 for a description of the AMX system MIB object groups.
Table 4.2: AMX System MIB Object Groups
Object Group Purpose
amxAppliance
Provides general information about the AMX switch, including firmware and
hardware revisions
amxAmiq Provides a list of available IQ modules from the AMX switch
amxUserStation Provides a list of user stations connected to the AMX switch
amxStats Provides statistics on packets for each port (only available internally)
amxSnmp Provides information on SNMP settings
Load the AMX-MIB file into your SNMP browser to start monitoring and managing AMX switch-
specific objects. Once you have enabled the sending of traps on the AMX switch, these traps can be
interpreted by the SNMP trap listener by using the trap-specific MIB files. The following table
describes the MIB files required for the SNMP processing.
Table 4.3: AMX System MIB Trap Files
Trap File Purpose
AMX-MIB Used by the SNMP Browser/Manager to monitor/manage the AMX switch
AMX5000-TRAP-MIB SNMP traps for the AMX5000 switch
AMX5010-TRAP-MIB SNMP traps for the AMX5010 switch
AMX5020-TRAP-MIB SNMP traps for the AMX5020 switch
AMX5030-TRAP-MIB SNMP traps for the AMX5030 switch
Exit
This menu selection will return you to the ready prompt.