User guide

Chapter 3: Operations 53
• SUN Single-Port
• USB Single-Port
• PS/2 Dual-Port
• SUN Dual-Port
•USB Dual-Port
• Serial Single-Port
• MDM target device
5. Type a new name (1-15 characters) for the device in the Name field.
6. If the device is an AMIQ-USB/AMIQDM-USB module or AMIQ-VSN/AMIQDM-VSN
module, select a keyboard country layout, shown in
Table 3.1 on page 42, from the Layout
drop-down list. For all other devices, this field is disabled.
7. If the device is an AMIQ-USB/AMIQDM-USB module or AMIQ-VSN/AMIQDM-VSN
module, select the emulation setting for the device from the Emulation drop-down list. For all
other devices, the field is disabled.
8. To save changes and return to the Device Admin screen, click Apply. To exit the OSCAR
interface, click Cancel or X.
To edit a device (seamless configuration):
1. Press Ctrl+Ctrl to launch the OSCAR interface.
2. Click the Admin tab. The Device Admin screen displays.
NOTE: The Device Admin screen will display only the devices that are currently attached to the switching system
and powered. Only the Administrator can edit device attributes.
3. From the drop-down list, select the device you wish to edit.
4. Click the Edit Device button. The Edit Device screen displays.
5. Type a new name (1-15 characters) for the device in the Name field.
From the Target drop-down list, select the cascaded Avocent KVM switch to which the IQ
module is attached.
- or -
Select KVM Switch if the cascaded switch is a non-Avocent switch.