User guide

Chapter 3: Operations 31
7. Click the Change button. The Change Hotkey screen displays.
Figure 3.3: Change Hotkey Screen
8. If the selected hotkey is already assigned to a different target device, you can re-assign the
selected hotkey or return to the Change Hotkey screen to select another hotkey. To clear a
hotkey assignment to a target device, select the hotkey and click Clear.
9. Click the down arrow button and select the desired hotkey from the drop-down list.
10. To save changes, click OK. To exit the OSCAR interface, click Cancel or X.
Setting a quick switch hotkey for target devices
A quick switch hotkey allows you to quickly connect to target devices using a hotkey sequence
relative to the placement of the target device on the OSCAR interface list. The
Ctrl+Up hotkey
sequence will connect you to a target device one above the currently connected target device on the
OSCAR interface list. The
Ctrl+Down hotkey sequence will connect you to the target device
directly below the currently connected target device on the OSCAR interface list.
To enable the quick switch hotkey:
1. Press Ctrl+Ctrl to launch the OSCAR interface.
2. Click the Console tab, then click the down arrow button to display the Configure screen.