User guide

Chapter 3: Accessing the ACS 6000 Console Server via the Web Manager 49
To remove members from a user group:
1. Click Users - Authorization - Groups.
2. Click the user group name.
3. Check the box(es) of the member(s) you want to remove. Click Delete to delete the selected
members.
To configure a login profile for a user group:
1. Click Users - Authorization - Groups.
2. Click on the name of the group whose login profile you want to set. In the Side Navigation Bar,
click Login Profile.
3. Check the Enable Log-In Profile box.
4. Click ts_menu to use the ts_menu application when a member of the selected user group opens
a session in the console server. Enter the ts-menu options in the Options field.
-or-
Click CLI to use CLI when opening a session. Enter the CLI command in the CLI cmd field
and check the box if you want to exit after executing the command.
5. Click Save.
NOTE: If the user belongs to multiple groups, the login profile used will be the first enabled login profile based on
alphabetical order of the group.
Table 3.8: ts_menu Options
Command Description
-p Displays TCP port
-i Displays local IPv4 assigned to the serial port
-i6 Displays local IPv6 assigned to the serial port
-u <name> Username to be used in the target session
-e <[^]char> Escape character used to close the target session
-l Sorted lists ports and exit
-ro Read-Only mode
<portname> Connect directly to a serial port
-t Idle time-out in seconds to choose the target