User guide

40 Cyclades ACS 6000 Advanced Console Server Installation/Administration/User Guide
3. To add a new probe or match string or delete an existing string, perform the following steps.
a. Select Probe Strings or Match Strings.
b. To add a string, click Add, enter a new string in the New Probe String or New Match
String field and click Save.
c. To delete a string, select the checkbox for the string and click Delete.
4. Click Save.
To configure the input/output strings used by auto answer:
1. Select Ports - CAS Profile - Auto Answer.
2. To add an auto answer input and output string, click Add. Enter a new string in the Input String
or Output String fields and click Save.
-or-
To delete an auto input and output string, select the checkbox next to the string you want to
delete. Click Delete, then click Save.
Dial-in Profile
An administrator can configure secure dial-in settings such as OTP login, PPP connections, PPP/
PAP authentication, callback and OTP users for PPP connections.
NOTE: If pluggable devices are being used for dial-out, dial-in should be disabled.
To configure secure dial-in settings for ports with the Dial-in Profile:
1. Select Ports - Dial-In Profile - Settings.
2. To enable logging in to the console server through the modem and select a condition for which
logging in is allowed, perform the following steps.
a. To allow callback connections only, select Callback.
b. To allow any connection, select Enable.
3. To enable OTP authentication, select Enable from the OTP Login Authentication menu.
4. To enable and select a condition for PPP connections, perform the following steps.
a. To allow PPP callback connections only, select Callback.
b. To allow any connection, select Enable.
5. When the PAP authentication protocol is configured for the port, select the authentication type
from the PPP/PAP Authentication menu.
6. Click Save.
To configure callback users and phone numbers for ports with the Dial-in Profile:
1. Select Ports - Dial-In Profile - Secure Dial-In - Callback Users.
2. Click Add.