User guide

Chapter 3: Accessing the ACS 6000 Console Server via the Web Manager 19
Figure 3.2: Wizard screen
The following procedures describe how to configure the console server from the Wizard.
To configure security parameters and select a Security Profile:
1. Select the Security link in the content area.
2. Select the desired Security Profile. If using a Custom Security Profile, click the checkboxes
and enter values as needed to configure the services, SSH and HTTP and HTTPS options to
conform with your site security policy.
3. If you are not using DSView 3 software to manage the appliance, uncheck the Allow Appliance
to be Managed by DSView box.
4. Click Next to configure the Network or click the Network, Ports or Users link to open the
appropriate screen.
To configure network parameters:
1. Select the Network link in the content area.
2. Enter the Hostname, Primary DNS and Domain in the appropriate fields.
3. Select the IPv4 or IPv6 method for the ETH0 interface. If using Static, enter the Address, Mask
and Gateway in the appropriate fields.
4. Click Next to configure ports or click on the Security, Ports or Users link to open the
appropriate screen.