User guide

Chapter 2: Installation 9

The following figure shows the rear connectors on the console server.

Figure 2.3: Rear of the Console Server (ACS 6032 Console Server Shown)

Table 2.2: LEDs on the Console Server Front

Label Description

PWR/CPU Blue

• Blinks - During unit boot

• Solid - During operation

• Off - Power is off

ETH 0/ETH 1 • Amber - Link at 10BaseT speed

• Yellow - Link at 100BaseT speed

• Green - Link at 1000BaseT speed

• Off - No link/cable disconnected/Ethernet fault

AUX/MODEM Dual LED: Yellow on top, green on bottom

• Yellow - DTR/DCD activity

• Green - TXD and RXD activity

• Off - No activity

[One LED for each serial port] Green

• Blinks - Ready, with activity

• Solid - Ready

• Off - Not ready

Table 2.3: Connectors on the Console Server Rear

Number Description

1 Power supplies (dual AC shown).

2 Serial ports (32 ports shown). Models come with 4, 8, 16, 32 or 48 serial ports.

3 ETH 1 10/100M/1G Ethernet port. Can be connected to a second network or used for failover.