User guide
Chapter 1: Installation 9
NOTE: During the upgrade process, do not remove the upgrade cable or
Integrated LCD KVM Switch power adaptor.
8. An Upgrade complete! message appears above the progress bar
after a successful firmware upgrade. You may now exit the utility.
Daisy-chaining your Integrated LCD KVM Switch
The Integrated LCD KVM Switch features up to 16 levels of attached
switches via the daisy-chain cable. The KVM switch has a 128 server
daisy-chain limit. Contact Avocent to purchase additional KVM
switches and cables.
To cascade multiple switches:
1. Plug one end of the daisy-chain cable into the Daisy Chain Out port
on the rear of your primary Integrated LCD KVM Switch.
2. Connect the other end of the daisy-chain cable to the Daisy Chain
In port on the secondary KVM switch.
3. Repeat steps 1 and 2 for all subsequent switches.
4. Plug the ground terminator into the Daisy Chain Out port on the
rear of the last daisy-chained Integrated LCD KVM Switch.
Figure 1.7: Basic Daisy-Chain Example