MiTraveler 970 Android 4.0 9.
Tablet of Contents Specifications………………………………………………………………….1 What’s inside the box…………………………………………………………1 Tablet Parts……………………………………………………………………2 Getting started………………………………………………………………...4 Connection to Internet………………………………………………………..7 Task Bar……………………………………………………………………….8 Install and Uninstall…………………………………………………………..9 Camera……………………………………………………………………… .9 HDMI………………………………………………………………………….11 Trouble Shooting…………………………………………………………….
Specifications Display: 9.7 inch 1024X768 Resolution Capacitive screen CPU: Boxchip A10 RAM: 1GB DDR Internal Storage: 16GB Expansion Memory: USB & TF card, 32GB Max. Built-In Wireless: 802.11b/g/n AC Adapter: DC 5V-2A Operating System: Android 4.0 What’s Inside The box 9.
Tablet Parts 10 11 9 1 2 3 4 5 6 7 8 1 Headset Port 2 5Pin USB Port 3 TF card slot 4 HOST 5 HDMI 6 DC Jack 7 Power ON/OFF button 8 RESET Button 9 Back Button 10 Volume + 11 Volume 2
Getting Started Battery Charging The tablet has a built-in rechargeable Li-polymer battery. 1. To charge connect the AC power adapter to the DC jack on the right side of the tablet. 2. When you see” ” in the tablet, it show the battery is charging. 3. The tablet can be used even if the battery is being charged. Power ON/OFF ON: 1. Press and hold the power button until the tablet turns “ON”. OFF: 1. Press and hold the power button until device optional 2. Select power off 3.
Removing TF card 1. Close all applications and documents which have been opened from the TF card. 2. Select “Setting” and find “ Storage” then click “Unmount SD card”. 3. A prompt will be seen on the screen saying “ SD card safe to remove” 4. Gently press the TF card to remove and pull out the TF card. Note: Insert the TF card in correct position, otherwise it will damage the card and the slot.
How to connect with computer Note: first, put the switch to Device status, Before transferring documents, you need set to store mode for the tablet. 1. Use USB cable to connect tablet with computer. Notice bar will appear notice cue. 2. Press Menu button to pop up Menu option, and click on Notice. 3. In the notification panel, click on the USB connection, then click Loading USB Storage Device. 4. The USB is successfully connected to the computer.
Connection to Internet Wireless: 1. Select “ Settings” 2. Select “Wi-Fi” and slide OFF to ON status. 3. All detected wireless networks in the area will be listed on the right. Click to select desired wireless connection. 4. Enter WEP key or network key if necessary. 5. Once connected to a wireless network, settings will be saved 6. Wireless icon will appear on the taskbar when connected successfully.
Web Browsing Connect to the internet and launch the browser.
Install and Uninstall Install from memory card or USB drive Please go to APK Manager，Select “Install” and then select the file with the extension name .apk in the memory card. Select “Install” to install the software.
1.Touch the icon at the bottom right and you can save your photos in DCIM/Camera directory in TF card. 2. Move the icon mode to film mode. on the right and you can switch camera 3. Touch the icon on the top right to see the previous picture and you can also delete, share, set it as the wallpaper or contact profile. Click finish button to exit camera interface.
HDMI You can switch the video to play it on the HDMI display equipment (such as TV with a HDMI interface) by HDMI. The maximum output resolution is 2160p and its method is shown as follows: 1. Turn on the Tablet; 2. Connect the Tablet to TV by a HDMI cable. Turn on the TV; 3. Play video on the Tablet; 4. The video will be switched on the TV. Wait for more than 5 seconds; 5. You can switch by 3 methods: a) When the video play is finished, the video will be switched automatically back on the Tablet.
Tap the application you want to close. A pop-up window will be displayed. Tap “Stop” to close that application. Mandatory Power off 1. Press and hold the power button for 7 seconds and the device will be powered off. 2. Press the reset button on the right and the device will be forced to be powered off. Restore Default Setting If you want to reset the factory setting and erase all materials, please press Settings → Backup & Reset → Factory data reset.
