User's Manual

19
Connect video switcher to a PC and download a time control software from AVMATRIX official website
www.avmatrix.net/download/ Open the software and click Scan button to search and connect the device,
then the clock time will be changed to same time to the PC’s time.
6.2.2 Network Settings
1) IP Setting. There are two ways to acquire the IP: Dynamic (IP configured by router) and Static (set IP
freely by yourself). Select the method you need by knob menu. The default setting is Dynamic.
Dynamic: Connecting the video switcher with a router with DHCP features, then it will auto obtain an IP
address automatically. Make sure that the video switcher and PC are in the same local area network.
Static: Select static IP when the PC is without DHCP. Connect the video switcher with PC via network
cable, set the PC’s IP address to the same IP range as video switcher (the video switcher’s default IP
address 192.168.1.215), or set the video switcher’s IP address to the same IP range as PC’s IP address.
2) Netmask. Set the Netmask. The default setting is 255.255.255.0.
3) Gateway. Set the Gateway according to the IP address. Save configuration when network setting finish
6.2.3 Record Settings
1) Basic Specification
Record Video Source
PGM
Record Storage
SD Card (class 10)
SD Card Format
Max 512GB (file system format exFAT or FAT32)
Record Video Format
H.264 (mp4)
Record Video Resolution
1080p 60/50/30/25/24hz, 1080i 60/50hz
2) SD Card Install and Uninstall
Install: Format SD card to exFAT or FAT32. Install Plug and press the SD card into the slot from the side of
video switcher. Wait 3 sec, the LED indicator beside it will turn on.
Uninstall: Press the card to take it out. Use a card reader to play or copy the video files to a computer.
3) Recording Control
Press REC button start recording. Meantime, the button indicator turns on. During recording, press Pause
button the recording pause, and press Pause button again recording continue. Press REC button again
recording stops and save the video files to SD card.
The recording status shown beside the menu, including information of REC mark, recording time, SD card