User's Manual

13
4.4 Transition Effects
4.4.1 MIX Transition
Press the MIX button to select a basic A/B Dissolve for the next transition. When button LED turns on it is
active. Then use T-Bar or AUTO to operate the transition. And there are 3 different speed rates for choice
from the menu. The MIX transition effect as below
4.4.2 WIPE Transition
WIPE is a transition from one source to another and is achieved by replacing the current source by
another source. Press the WIPE button and the LED turns on then it is active. There are total 8 WIPE
selections wiping start from different directions, including Left-Up, Up, Right-Up, Left, Right, Left-Down,
Down, and Right-Down. And there are 3 different speed rates for choice from the menu.
For example, if choosing Right-Up from the menu, then use T-Bar or AUTO to operate the transition, the
WIPE effect as following:
4.4.3 FADE Transition
Fade is a transition from one source to another with fade gradually transition effect. Press the FADE
button and use T-Bar or AUTO to operate the FADE transition. And there are 3 different speed rates for
choice from the menu.
Main Menu
Secondary Menu
Option
Default
Effect
Effect
MIX/WIPE/FADE
MIX
Rate
0/1/2
0
Wipe
Left-Up/ Up/ Right-Up/ Left/ Right/
Left-Down/ Down/ Right-Down
Left-Up
Exit