User's Manual

11
4.3.2 Transition Control
1) Transition without Effects
CUT performs a simple immediate switch between Preview and Program views. This is no delay
seamless switching and the selected transition effect WIPE, MIX or FADE is not used.
2) Transition with Effects
AUTO performs an automated switch between Preview & Program views. The speed of the transition is
set by the menu. The selected transition WIPE, MIX or FADE will also be used. T-Bar transition effect
performs same as AUTO, but speed depends on the speed of the manual switch.
4.3.3 FTB (Fade to Black)
Press FTB button it will fade the current video Program source to black. The button will flash to indicate
that it’s active. When press the button again it acts in reverse from complete black to the currently
selected Program video source, and button stop flashing. FTB is usually used for emergency condition.
Note: When the PGM window display black and keep black even after transition, please check if the FTB
button flashing or not. If it is flashing press the button again to stop black.
4.3.4 Source Selection of Channel 5 and Channel 6
Hold the button SHIFT and press button 5 / button 6 to cyclic switch the video source among HDMI, DVI,
VGA and USB. The default format is HDMI. The switcher saves the settings when turn off the switcher.