User Manual

3
1920×1080, 1280×720, 1080×1920 25fps
Capture Color Space
YUY2, uncompressed
Audio Capture
4×HDMI embedded audio capture
Audio Codec
16 bit PCM, 48kHz, 1536kbps
Other Features
Support 1080i hardware de-interlacing, 3D noise reduction
algorithm
SUPPORTS
Device Support
Support XBOX, PS4, SWITCH, Video player, TV box and
media box, etc.
OS Support
Windows 7 and above, Linux 18.04 and above
Software Compatible
OBS, XSplit, VLC, VirtualDub, VMix, VidBlaster, Wirecast,
Microsoft Media Encoder, Adobe Flash Media Encoder,
Any other DirectShow/V4L2/AVCaptureSession
encoding/streaming software
APIs Support
Windows(DirectShow, DirectSound/WASAPI)
Linux(V4L2, ALSA)
OTHERS
Power consumption
≤2.0W
Temperature
Operating temperature: 0℃~60℃
Storage Temperature: -20℃~70℃
Relative Humidity
5%~90% non-condensing
Dimension
120.1×88.4×21.6mm
Weight
Net weight: 150g, Gross Weight: 195g
4.Installation
Note: Only hold the edge of the card or the metal bracket when taking the card, do not touch
the electronic components to prevent the chip from being harmed by static electricity.
The PCIE Card must not be plugged or unplugged while the system is powered.When the PCIE card are
added to or removed from the system, should be ensured that the computer is turned off.
4.1 Hardware Installation
Step1.Power off the computer device before the PCIE capture card installation.
Step2.Install the PCIE capture card into the PCIE-X4 Gen2 slot in your computer chassis and lock.
Step3.Connect the HDMI interface device signal source to the PCIE card interface and make sure the
cable is connected properly.