4-CHANNEL HDMI PCIE CAPTURE CARD
CONTENT 1.Brief Introduction ...................................................................................................................................................... 1 1.1 Overview .........................................................................................................................................................1 1.2.Main Features ................................................................................................................................................
1.Brief Introduction 1.1 Overview VC42 is a 4-Channel HDMI PCIE video capture card, it supports four HDMI inputs and capture,and compatible with console or PC games and digital cameras. HD video capture up to 1080p60 with bit rates up to 200Mbps, transfer bandwidth up to 2.5GB/S, VC42 can meet the needs of high-bandwidth, high-performance image acquisition and processing applications,ideal for use in live streaming platforms. 1.2.Main Features 4-channel HDMI 1.
2.Interfaces HDMI IN4 HDMI IN3 HDMI IN2 HDMI IN1 PCIE-X4 Interface 3.Specification CONNECTIONS Host Interface PCIE2.0x4 2.5GB/s transfer bandwidth Video Interfaces 4×HDMI1.4 inputs HDMI Input Format Up to 1080p60 each channel Capture Format 1920×1200, 1920×1080, 1600×1200, 1600×900, 1440 ×900, 1280×1024, 1280×800, 1280×720, 1080×1920, 1024×768, 800×600, 720×576, 720×480 STANDARDS 60fps 1920×1080, 1280×720, 1080×1920 59.
1920×1080, 1280×720, 1080×1920 25fps Capture Color Space YUY2, uncompressed Audio Capture 4×HDMI embedded audio capture Audio Codec 16 bit PCM, 48kHz, 1536kbps Other Features Support 1080i hardware de-interlacing, 3D noise reduction algorithm Device Support Support XBOX, PS4, SWITCH, Video player, TV box and media box, etc. SUPPORTS OS Support Windows 7 and above, Linux 18.
Step4.Turn on the computer, beginning to install the PCIE capture card drivers. 4.2 Driver Installation Step1.Download the driver from the AVMATRIX website at www.avmatrix.com and opening the driver. Step 2. When the driver is opened a notification of "Find Video Capture Card Driver: 1" will pop up, which indicates that the PCIE capture card has been recognized, then click "Install". Finally, Click "OK" to complete the installation. Note: Supported Windows 7 and above, Linux 18.
1.First card When( SW1, SW2, SW3, SW4 ) is set to downard,it sets the PCIE capture card to first card. 2.Second card When( SW1 ) is set to upward, and ( SW2, SW3, SW4 ) is set to downward, it sets the PCIE capture card to second card. 3.Third card When( SW2 ) is set to upward, and ( SW1, SW3, SW4 ) is set to downward, it sets the PCIE capture card to third card. 4.Fourth card When( SW3 ) is set to upward, and ( SW1, SW2, SW4 ) is set to downward, it sets the PCIE capture card to fourth card. 6.
Step2. Right-click "Video Capture Device" and select properties, enter the properties interface, and select the signal source as your device. Users can set other parameter setting in the properties pages and then click OK. Step3. Click on the audio setting icon to setting audio, as shown in the picture. Then enter the properties, and select the device.
Step4. Enter “Advanced Audio properties” can change the setting about the volume, balance, audio monitoring, and Tracks etc.
