User's Manual

4.5 Audio Mixer Setting

4.5.1 Audio Description

This video switcher is coming with 1 channel L/R analog audio input & output and SDI embedded audio.

4.5.2 Audio Mode

1) Mixing Mode

Rotary and press the knob button to set audio mode as mixing.

Press CH1/CH2/CH3 button to enable the mixing audio mode, total 3 channels for mixing.

Press SRC 1/ SRC 2/ SRC 3 buttons to select the audio source from SDI1/ SDI2/ SDI3/ SDI4/ IN5 / IN6/

TRS IN.

2) Following Mode

after that the video switcher will remember your last choice. Press Master button to enable the following

mode audio control. When the audio is in Following mode the audio is coming from the embedded audio

of Program video source. Adjust the master fader to control the audio volume.

2) Earphone

Press LISTEN button and use a 3.5mm earphone to monitor an assigned audio, PGM audio as the default.

Press LISTEN button cyclically to assign one channel audio as the audio source.