User's Manual
Table Of Contents
- 1.BRIEF INTRODUCTION
- 1.1.Overview
- 1.2.Main Features
- 2.INTERFACES
- 2.1.Rear Interfaces
- 2.2.Tally PIN Definition
- 3.SPECIFICATION
- 4.FRONT CONTROL PANEL
- 5.OPERATION INSTRUCTION
- 5.1.Multiview Output Layout
- 5.2.PGM PVW Switching
- 5.2.1.PGM, PVW Channel Selection
- 5.3.Transition Control
- 5.3.1.FTB (Fade to Black)
- 5.4.Audio Mixer Setting
- 5.4.1.Audio Description
- 5.5.Transition Effects
- 5.5.1.MIX Transition
- 5.5.2.WIPE Transition
- 5.5.3.FADE Transition
- 6.MENU SETTING
- 6.1.SDI PGM/ AUX and Multiview Output Format
- 6.2.Audio Setting
- 6.2.1.Mixing Mode
- 6.2.2.AFV Mode
- 6.3.PIP Mode
- 6.4.Main Menu Setting
- 6.4.1.System Settings
- 6.5.Network Settings
- 6.5.1.Network
- 6.5.2.NetMask
- 6.5.3.GateWay
5
4. FRONT CONTROL PANEL
1
MIXER
Support 2-Ch audio mixing
AFV
Audio follow video mode
2
FADE
Fade transition effect
MIX
Mix transition effect
Wipe transition effect
3
PIP
Picture in Picture
FTB
Fade to Black, used for emergency situation
4
RATE
The transition rate
5
PVW:1-6
Selecting the signal source for Preview
PGM:1-6
Selecting the signal source for Program
6
T-BAR
T-bar Manual Transition
7
MENU
Menu Setting
8
AUTO
Performs an automated switch between Program and Preview.
CUT
Performs a simple immediate switch between Program and Preview.