User's Manual

6
3.2 Keyboard Button
◼ Camera Control
CAM1 and CAM2 buttons are for Camera 1, Camera 2.
ZOOM IN and ZOOM OUT to adjust the size of the picture.
Press the button, the button LED will be turned on to
indicate that the manual mode is enabled. Then the
camera can be controlled via the Joystick.
◼ Audio Mixer
CH1 ON / CH2 ON / CH3 ON buttons are for SDI1 / SDI2 /
SDI3 / SDI4/ VIDEO5 / VIDEO6 / XLR / RCA / MIC audio
source selection. Master for output the mixing audio to
program.
The audio faders are for adjusting the audio volume.
◼ Menu Control
The LCD screen for showing the menu content and
working status. The button for menu setting.
Rotate the knob clockwise or counterclockwise to adjust
the menu and increase and decrease the value.
Press the button to select the menu option.
◼ T-Bar Manual Transition System
User can do the transition from the current program source
to the selected preview source. The selected transition
effects will work meantime. When the T-Bar has travelled
from B-BUS to A-BUS the transition between sources is
complete. The T-Bar has indicators next to it which light
when the transition is complete.
◼ CUT and AUTO Take
CUT performs a simple immediate switch between
Program and Preview. The selected transition WIPE, MIX
or FADE is not used.
AUTO performs an automated switch between Program
and Preview. The selected transition WIPE, MIX or FADE
will also be used.