Owner's manual

35
4. Troubleshooting
A) MASTER RESET, to do in case of software malfunctions:
Note User’s waypoints and settings will be deleted.
♦ Switch Geosat
2C
Off.
♦ Switch it On pressing [PAGE] together with another key. A new MENU will be
displayed on the screen.
♦ Use [CURSOR] to select RAM Menu and press [ENTER].
♦ With the right [CURSOR] select RAM clear.
♦ When RAM clear is highlighted press [ENTER] and [ENTER] again to confirm.
B) Problems with GPS signal reception:
♦ Check that the antenna is positioned as advised in the manual.
♦ Check that the antenna connector is correctly located in Geosat
2C
.
♦ Perform a GPS RESTART, pressing [MENU] in the GPS page.
♦ Make another attempt to obtain the GPS signal.
User Manual