USER MANUAL GEOSAT2c-v100a941ENG -151104
Dear customer, thank you for choosing our satellite navigation system Geosat2C GPS Car Navigator. We hope it will be helpful to give you the right prompts to reach your destination. Before using it please read carefully the user manual to know all its features and to be able to enjoy it better. For further information please visit our website www.avmap.it.
Summary 1. Installation ........................................................................................................................................................................... 25 INSTALLATION ........................................................................................................................................................................ 25 MOUNTING THE BRACKET ..........................................................................................................
1. Installation INSTALLATION Geosat2C is easy and quick to install. MOUNTING THE BRACKET Geosat2C can easily be mounted on every vehicle provided with car lighter, if installed wrongly it might not work properly. To work well it must be fixed on the dashboard with one of the brackets given in the box. Do not put it on the passenger seat, because it might be a dangerous distraction for the driver. ♦ The rotating bracket must be attached on the windscreen by its sucker, it can be used on most vehicles.
MOUNTING THE GPS ANTENNA The next step is the GPS antenna installation. The end of the antenna is magnetic so that you can place it outside the vehicle, its cable is made of a torn proof material so that it does not break even if it is closed between the door and body of the vehicle. The antenna can be placed on the dashboard or on the back of the vehicle, but Geosat2C will work better if it is put outside, on the bonnet or on the roof.
2. How to use Geosat 2C THE KEYBOARD Key ♦ ♦ ♦ Power On the unit. Change the displayed page (Map, Trip Computer, Directions). By pressing for 1 second to display the Brightness and Contrast menu it is possible to: − Activate the fast brightness shift. - Move the cursor to change the intensity. - Turn Off the unit (press and hold the key). Key and ♦ Key Zoom out and in. Key ♦ ♦ ♦ ♦ Move the arrow on the map. Select menu items. Select the keys on the virtual keyboard.
VERY IMPORTANT!!! When you switch On Geosat2C a note for your safety will appear on the display. If you select YES you can use Geosat2C in passenger mode and all the functions are activated. If you select NO you can use Geosat2C in driver mode and a few functions are not activated if the vehicle is moving. TO CHANGE THE MODE YOU MUST SWITCH THE UNIT OFF, SWITCH IT ON AGAIN AND THEN CHOOSE THE MODE YOU PREFER.
♦ To display the list of the Marks you created press twice [MENU] and choose “Mark list”. Updating the software and using Compact Flash with different software versions the Marks located in the inside memory are deleted because the unit, recognizing a new software, resets its memory. You should save your Marks on the Compact Flash using File Manager, to avoid this trouble. VERY IMPORTANT!!! THE FIRST TIME YOU USE FILE MANAGER YOU GOT THIS MESSAGE “DEVICE NOT INITIALISED”.
SYSTEM SETUP In MENU “General” you can enter the following data: ♦ Colour theme ♦ Automatic Brightness Using a light sensor mounted on the rear panel the unit automatically change the brightness level of the screen.
NOTES on the set-up: If you modify the configuration settings and then you cannot go back to the previous set-up anymore, restore the unit to the factory defaults (MENU “General”).
3. Warranty Conditions and Technical Supporting DEFINITIONS Warranty Product Conformity SC (Supporting Center) Purchaser indicates the concrete declaration of guarantee. indicates the equipment with the logo Geosat2C, contained in the wrap. indicates the correspondence of the Product to the aesthetical, the technical and functional features reported in the User Manual, included in the packaging.
Immediate expiry of the warranty effects Up to the warranty, the recognized rights to the Purchaser go down absolutely according to the following eventualities: ♦ If the Supporting Center verifies previous interventions on unauthorized person’s behalf, and/or interventions on the product making use of replacements that are not original and/or not officially recommended by the producer.
to the operator the problem you have. The operator of the Supporting Center will tell you the authorization number. At that point, the Purchaser will be able to send the broken equipment to the below address for the reparation on guarantee. The seller can follow the previous procedures or contact the telephone number (+39) 0585 772410 TECHNICAL SUPPORTING CENTER AvMap S.r.l. Via Caboto, 9 - 54036 Marina di Carrara (MS) - ITALY Tel.: +39 0585 772410 Fax: +39 0585 784044 www.avmap.it - info@avmap.
4. Troubleshooting A) MASTER RESET, to do in case of software malfunctions: Note ♦ ♦ ♦ ♦ ♦ User’s waypoints and settings will be deleted. Switch Geosat2C Off. Switch it On pressing [PAGE] together with another key. A new MENU will be displayed on the screen. Use [CURSOR] to select RAM Menu and press [ENTER]. With the right [CURSOR] select RAM clear. When RAM clear is highlighted press [ENTER] and [ENTER] again to confirm.
36 5.
MENU DIAGRAM User Manual 37
