User manual

35
Conversely, highlighting a file and pressing ZOOM OUT will delete the file from the CF card.
To load a file from the CF card, highlight it and press ENTER. The data will then be uploaded into
the EKP-IV.
B. SERIAL PORT DATA TRANSFER
The EKP-IV can also send and receive User Data from the AvMap Flight Planner, Jeppesen
FlightStarTM or other compatible programs through the serial port. An optional data cable is
required for this operation and it can be purchased directly from AvMap or from your local avionics
dealer.
1. Download or Upload Waypoints
The Waypoint functions allow you to send or receive Waypoint data through the serial port using
the NMEA0183 $WPL sentence. To work with Waypoints, press MENU twice from the Moving
Map, select COMMUNICATIONS and then either WAYPOINTS UPLOAD or WAYPOINTS
DOWNLOAD.
2. Download or Upload Flight Plan
The Flight Plan functions allow you to send or receive Flight Plan data through the serial port using
the NMEA0183 $WPL and $RTE sentences. To work with Flight Plans, press MENU twice from
the Moving Map, select COMMUNICATIONS and then either FLIGHT PLAN UPLOAD or FLIGHT
PLAN DOWNLOAD.
ENTE
R
ZOOM
IN
ENTE
R
MENU MENU