User manual

32
e) Selecting an Approach
The EKP-IV allows the pilot to pre-select an approach at the end (destination) of the Flight Plan
and to change the approach as desired. The approach can only be set through the Flight Plan
window. The EKP-IV does not allow setting of an approach from the Moving Map while navigating
or planning. The approach can, however, be established on an airport that is part of a direct
GOTO.
Once an airport is the final waypoint in the Flight Plan, select the airport and press MENU and then
SELECT APPROACH. This will bring up a list of available approaches for that selected Airport. Find
the desired approach and press ENTER to confirm.
Once the approach has been selected, the Flight Plan will automatically be edited to add new
waypoints along the approach to allow for proper descent into the airport.
f) Deactivating a Flight Plan
From the Flight Plan Database window, press MENU and select DEACTIVATE FP.
g) Renaming a Flight Plan
A Flight Plan can be renamed through the Flight Plan window. Once in the Flight Plan window,
Current GPS Fix
Active FP Leg
Inactive FP Legs
ENTE
R
MENU
MENU