User manual

3. Moving Waypoints

Waypoints can be moved easily in the EKP-IV. Put the cursor on the Waypoint to move, press

ENTER, select MOVE WAYPOINT from the menu and a silver band will emerge from the waypoint,

following the cursor as you find a new location. Press ENTER to finalize the move and save the

Waypoint’s new position.

F. FLIGHT PLANS

The EKP-IV has the capacity for 10 Flight Plans with a maximum of 100 legs in each. Flight Plans

can be created from the Moving Map using the cursor, or if you know the identification of your

destination and waypoints, they can be created in the Flight Plan screen. Only one Flight Plan can

be viewed and edited at one time, so it is important to make sure that the Viewed (current) FP is

the one intended for use.

1. Setting the Viewed (active) Flight Plan

The active Flight Plan can be set in either the Moving Map menu or in the Flight Plan window. The

Moving Map menu will display the active Flight Plan under VIEWED FP. From this menu, the active

Flight Plan can be changed to any of the 10 stored in memory. From the Moving Map press MENU

and select VIEWED FP.

If the current Flight Plan is active, then a warning will be displayed that the Flight Plan will be

deactivated prior to switching the Viewed FP.

ENTE