User manual

C. THE CLEAR BUTTON

The primary function of the CLEAR button is to cancel out of Menus. On the Moving Map it has two

functions – to remove the quick info windows (Elevation, Lat/Lon, Street Names, Airport info, etc)

that appear and to bring the cursor to the position fix. It is important not to press CLEAR too many

times as it could cause the screen to jump around a lot. If the cursor is off of the position fix and no

quick info has appeared, pressing CLEAR once will bring you the position fix. Pressing CLEAR again

will bring you back to the previous cursor position.

D. CHECKLISTS

The EKP-IV provides a series of checklists for Engine Start, Ground Check, Pre-Takeoff, Cruise and

Landing. All of the Checklists can be customized, and each one can contain 16 items. Each of the

16 items are user-defined alpha-numeric fields, allowing the pilot to enter anything desired. To get

to the Checklists, press MENU twice from the Moving Map then select CHECKLISTS.

The defaults for each Checklist are displayed below.