Operation Manual

Installing Pre-configured Call Destinations and Locations
NetWAYS/ISDN – 4 NetWAYS/ISDN for Administrators 47
Please note that the configuration values in the following
description are merely examples.
The SETUP.CFG file should contain the following information:
CDKey_NETWAYS=XXXXXXXXXXXXXXXX
This is the Product Identification Code (PIC). All letters are upper-
case; dots, hyphens and slashes are omitted.
InstallDirectory=c:\netways
The folder in which the program is to be installed
Node=000000000908
The 12-digit IPX node number: 000000000002 = automatic node
address assignment, 2 = fixed node address
AutoInstall=1
0 = manual installation, 1 = automatic installation (1)
InstallMode=1
1 = the NetWAYS/ISDN service starts automatically; 0 =
NetWAYS/ISDN does not start automatically when Windows starts
KeepDatabase=1
0 = delete existing databases in the installation folder; 1 = continue
using existing databases
Installing Pre-configured Call Destinations and
Locations
NetWAYS/ISDN allows administrators to automate the instal-
lation of pre-configured call destinations and locations.
The call destinations and locations to be used in the custom
installation must first be configured once in an installed copy
of NetWAYS/ISDN. NetWAYS/ISDN stores the call destina-
tions and locations in the following files in the
NetWAYS/ISDN folder:
Call destination files:
TARGET.DAT
TARGETI.IDX
TARGETN.IDX
netways-e.book Seite 47 Freitag, 28. November 2003 3:51 15