Operation Manual

First Connection: Testing TCP/IP
16 NetWAYS/ISDN – 2 Installation and First Steps
First Connection: Testing TCP/IP
To set up a connection to the ADC using the network protocol
TCP/IP, perform the following steps:
1. Open the NetWAYS/ISDN window.
2. Select the call destination “Fast Internet over ISDN”.
3. Select the “Connect” command in the “File” menu.
If the connection is successfully dialed up, the status
information “Physically connected” appears in the sta-
tus bar of the NetWAYS/ISDN window.
4. Open a Web browser and enter the address of AVM’s
WWW or FTP server in the “Address” bar:
http://www.avm.de/en
ftp://ftp.avm.de
From the AVM home page or the root directory of the FTP
server you can browse to other documents.
Going Online with NetWAYS/ISDN
Before you can connect to the Internet, certain conditions
must be met in your NetWAYS/ISDN settings and by your In-
ternet Service Provider.
Internet Service Provider Prerequisites
The provider must offer access over ISDN and/or ADSL.
The dial-in server should support “synchronous PPP” in
accordance with RFC 1618.
Authentication with the Internet Service Provider can
take place using Caller ID or a user name and password.
The connection to your Internet Service Provider may
use either a static or a dynamic IP address. IP masquer-
ading is recommended on the connection to the Inter-
net.
netways-e.book Seite 16 Freitag, 28. November 2003 3:51 15