Operation Manual

Getting Started
NetWAYS/ISDN – 2 Installation and First Steps 15
Idle physical connections are dropped after
50 seconds.
The logical connection is terminated at the same time.
Channel bundling is set to “Manual”.
Cost allocation is set to “Caller”.
The CLI number (Caller ID) is not used for authentication.
NetWAYS authenticates itself with the ADC using the
user name “Gast”, and without a password.
2.4 Getting Started
When you have installed and started NetWAYS/ISDN, you
can set up a test connection to a dial-in server in the AVM
Data Call Center (ADC) using the pre-configured call destina-
tion.
Before you can activate a test connection to the ADC or to
AVM’s web site, you must configure a location in
NetWAYS/ISDN. For detailed instructions, see the Online
Help.
If you want to monitor the progress of an existing connec-
tion, NetWAYS/ISDN offers two ways to do so.
Select the “Statistics...” command in the “Monitoring”
menu. The Statistics dialog appears. This dialog pro-
vides complete information about the current connec-
tion.
Or
Select the “Cockpit” command in the “Monitoring”
menu. The “Cockpit” display appears. The Cockpit indi-
cates whether a connection is currently active, when
the physical connection will be cleared down (if it re-
mains idle), and how many B channels are in use.
netways-e.book Seite 15 Freitag, 28. November 2003 3:51 15