Operation Manual

Remote Access Server Hardware and Software
NetWAYS/ISDN – 2 Installation and First Steps 13
Remote Access Server Hardware and Software
WindowsXP, 2000, or NT server with the AVM Access
Server and an AVM ISDN-Controller B1, T1, T1-B, C2 or C4
any remote access server that supports PPP over ISDN
2.2 Installing NetWAYS/ISDN
To install NetWAYS/ISDN, proceed as follows:
1. Insert the NetWAYS/ISDN CD in your CD-ROM drive.
The CD introduction starts automatically.
2. Start by selecting the language in which you want to
install NetWAYS/ISDN.
3. Select the operating system you are using.
4. In the sign-on window, select “Install NetWAYS/ISDN”
to start the Setup program.
5. Click “Next” in the NetWAYS/ISDN Setup program’s
sign-on dialog to proceed with the installation.
6. In the dialog that follows, enter your NetWAYS/ISDN
Product Identification Code. The Product Identification
Code is printed on the back of the NetWAYS/ISDN CD
case.
7. In the “Choose Destination Location” dialog, specify
the folder in which you want to install NetWAYS/ISDN’s
program files.
The Setup program suggests the default path C:\
PROGRAM FILES\AVM\NETWAYS. Click “Browse...” if
you would like to specify a different folder.
8. The Setup options you have selected are summarized in
the “Start Copying Files” dialog. If you want to change
any of these settings, click “Back” to return to the previ-
ous dialog.
When all the settings are correct, click “Next” to install
NetWAYS/ISDN.
netways-e.book Seite 13 Freitag, 28. November 2003 3:51 15