Operation Manual

92 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
Figure 6-1:
Internetworking Configuration Menu
To configure ISDN interfaces, INETCFG is required. If INETCFG is
not already loaded, load it by typing the following command at the
server prompt:
LOAD INETCFG <Enter>
The Internetworking Configuration menu is displayed:
1. From the Internetworking Configuration menu, select Net-
work Interfaces , then press <Enter>.
The Network Interfaces window is displayed.
If you are configuring a new interface, ensure that the appropri-
ate ISDN-Controller has been configured (see Chapter 5, "Con-
figuring Boards"), then continue with Step 2.
The Network Interfaces window displays a list of network inter-
faces associated with each configured ISDN-Controller with the
following information:
Board Name Name you gave to the ISDN-Controller when you
configured it.
Interface Each interface is identified as BoardName_n,
where n is the interface number. An AVM ISDN-
Controller for BRI has 2 interfaces, an AVM ISDN-
Controller for PRI 30 interfaces.
Group Interface group, if any, that the ISDN interface
belongs to.
Procedure