Operation Manual

Configuring Boards 87
Table 5-1:
D Channel Protocols and protocol stacks
Protocol / Stack Description
DSS1 / DSS1T1 internationally standardized ISDN D channel protocol, formerly called Euro-
ISDN or E-DSS1. This ISDN D channel protocol is already or will soon be
provided by all European countries that agreed to the Memorandum of
Understanding in 1989.
1TR6 / 1TR6T1 national ISDN D channel protocol, provided in Germany.
VN3 national ISDN D channel protocol provided in France (also called NUMERIS).
Note that this driver also supports VN4!
CT1 national ISDN D channel protocol provided in Belgium (also called ALINE).
NI1 national ISDN D channel protocol in the USA (National ISDN-1).
5ESS ISDN D channel protocol in the USA, provided at AT&T custom ISDN BRIs.
AUSTEL national ISDN D channel protocol in Australia (according to TS 013).
If you want to use other interrupts than the default on your ISDN-
Controller T1 or T1-B, please contact AVM for more information.
8. Check the ISDN D Channel Protocol.
This parameter specifies, which ISDN D channel protocol or
protocol stack shall be loaded for this ISDN-Controller to access
the ISDN network. The NetWare MultiProtocol Router for ISDN,
in conjunction with the corresponding ISDN-Controllers, sup-
ports the internationally standardized D channel protocol DSS1,
often referred to as "Euro-ISDN", as well as various national D
channel protocols.
Make sure that you select the D channel protocol provided at
your ISDN access (direct access or via PBX).
B1, B1 PCI, B1-MCA,
PCMCIA B: Default: DSS1
Options: DSS1, 1TR6, VN3, CT1, NI1,
5ESS, AUSTEL, D64S, DS01,
DS02, MDSS1, M1TR6
M1, M2: GSM
T1, T1-B: Default: DSS1T1
Options: DSS1T1, 1TR6T1
Important
Boards.pm6 27.05.97, 11:3787