Operation Manual

84 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
Configuring an ISDN-Controller
The Internetworking Configuration menu is displayed:
Figure 5-1:
Internetworking Configuration Menu
It is recommended not to use the Fast Setup option in this menu to configure
NetWare MultiProtocol Router for ISDN 3.1. NetWare MultiProtocol Router
for ISDN 3.1 provides preconfigured files for standard environments, which
are described in the separate Quick Installation and Configuration manual
coming with the product.
Important
Procedure
1. From the Internetworking Configuration menu, select
Boards, then press <Enter>.
The Configured Boards window is displayed.
If you are configuring a new ISDN-Controller, continue with
Step 2.
If you are changing an existing board configuration, select that
ISDN-Controller, press <Enter>, then continue with Step 5.
The Configured Boards window displays a list of configured
ISDN-Controllers with the following ISDN-Controller relevant
information:
Board Name Name you assign to the ISDN-Controller.
Driver The driver you selected for the ISDN-Controller.
Int Interrupt request level (IRQ) used by the ISDN-
Controller.
Boards.pm6 27.05.97, 11:3784