Operation Manual

70 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
8. On the remote server, press <Esc> two times (on a NetWare
3.12 server) or three times (on a NetWare 4.x server) and
select Yes to exit INSTALL.
9. At the server console prompt, type
REMOVE DOS <Enter>
DOWN <Enter>
EXIT <Enter>
You can also use a reboot.ncf file with the following lines:
remove dos
down
exit
Make sure, however, that the server is automatically restarted from the
DOS prompt, i.e. that the ´server´ command is included in the
autoexec.bat file.
10. To terminate the remote session:
On a local NetWare 3.12 server, press <Shift>+<Esc>, select Yes at
the prompt, then press <Enter> to return to the server console
prompt.
On a local NetWare 4.x server, press <Alt>+<F2>, select Yes at the
prompt, then press <Enter> to return to the server console
prompt.
The installation is complete.
Go to Chapter 4, "Basic Design of ISDN-WANs and Configura-
tion Overview" for an overview of all required configuration
tasks.
Suggestion
Deinstallation
NetWare MultiProtocol Router for ISDN 3.1 can be deinstalled using
INSTALL.NLM to remove product entries from the INSTALL.NLM
database. Removing the entries does not remove files or rename the
configuration. The router remains fully operational, and subsequent
installations are not treated as upgrades.
Installi.pm6 27.05.97, 12:5170