Operation Manual

Installing NetWare MultiProtocol Router for ISDN 3.1 65
8. To terminate the remote session:
For NetWare 3.x versions of RCONSOLE, press <Shift>+<Esc>,
select Yes at the prompt, then press <Enter>.
For NetWare 4.x versions of RCONSOLE, press <Alt>+<F2>,
select Yes at the prompt, then press <Enter>.
9. Press <Esc> and select Yes to exit RCONSOLE.
10. Continue the installation as described below.
Procedure
Installing NetWare MultiProtocol Router for ISDN 3.1 on a Remote Server
If you want to perform a remote installation on a NetWare 4.1 server
from a NetWare 3.12 server, you must set the bindery context on the
remote NetWare 4.1 server. If the NetWare 4.1 server does not have a
bindery context set, the system will not accept a login attempt by any
directory services user.
After loading RSPAWN and SPXS on the remote server, complete the
following steps:
1. At the local server console prompt, type
LOAD INSTALL <Enter>
The Installation Options menu appears.
2. From the Installation Options menu, select Product Options,
then press <Enter>.
If you are installing from a NetWare 3.12 server/router, a list of
installed products (if any) is displayed.
If you are installing from a NetWare 4.1 server/router, the Other
Installation Actions menu appears. Select the View/Configure/
Remove installed products option and press <Enter>. A list of
currently installed products (if any) is displayed.
3. To install a new product to install, press <Ins>.
4. Specify the correct path from which to load the source files.
Installi.pm6 27.05.97, 12:5165