Operation Manual

64 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
1. Run RCONSOLE.
If you are running a local NetWare 4.x server, the Connection Type
menu appears. Whether you are installing on a remote server
over a LAN medium or over ISDN, in either case select SPX.
The files REMOTE.NLM and RSPX.NLM must be loaded on the remote
server before you can open a remote session to it with RCONSOLE. If
you are unfamiliar with RCONSOLE and are using NetWare 3.12, see
NetWare 3.12 System Administration. If you are using NetWare 4.x, see
NetWare 4.0 Supervising the Network.
A window displays a list of available servers.
2. To open a session, select a remote server from the list of
available servers, then press <Enter>.
3. To display the RCONSOLE Available Options menu:
On a local NetWare 3.12 server, press the asterisk key (*) on the
numeric keypad - not <Shift>+<8> - on the main keyboard.
On a local NetWare 4.x server, press <Alt>+<F1>.
4. From the Available Options menu, select Transfer Files To
Server, then press <Enter>.
5. Copy the RSPAWN.NLM and SPXS.NLM files from the CD-
ROM SUPPS\ALL directory to the SYS:\SYSTEM directory
on the remote server.
6. Press <Esc> to return to the remote server console prompt.
7. From the remote server console prompt, unload old
RSPAWN and SPXS files, and load the new versions by
entering
UNLOAD RSPAWN
UNLOAD SPXS
LOAD RSPAWN
RSPAWN automatically loads SPXS.
If SPXS does not unload, manually unload any NLM
TM
(NetWare
Loadable Module
TM
) files that depend on SPXS or down and restart the
server.
Note
Procedure
Important
Installi.pm6 27.05.97, 12:5164