Operation Manual

Installing NetWare MultiProtocol Router for ISDN 3.1 61
13. At the server console prompt, type
DOWN <Enter>
EXIT <Enter>
14. Restart NetWare from the DOS prompt by typing
SERVER <Enter>
15. Continue with "Editing the STARTUP.NCF File."
Editing the STARTUP.NCF File
Procedure
To edit the STARTUP.NCF file, complete the following steps:
1. At the NetWare server system console prompt, type
LOAD INSTALL <Enter>
The Installation Options menu appears.
On a NetWare 3.12 server, select System Options, then press
<Enter>.
On a NetWare 4.x server, select NCF Files Options, then press
<Enter>.
2. Select Edit STARTUP.NCF File, then press <Enter>.
Be sure you select Edit, and not Create, because a STARTUP.NCF file
already exists. If you select Create, all information in the existing file is
lost.
On a NetWare 3.12 server, the full path name of STARTUP.NCF is
displayed.
On a NetWare 4.x server, only the drive and directory are dis-
played.
3. Press <Enter> to accept the default, or specify a boot path
location for the SERVER.EXE file.
4. Press <Enter> to view the contents of the file.
Add the following lines to the end of the file:
SET MINIMUM PACKET RECEIVE BUFFERS=400
SET MAXIMUM PHYSICAL RECEIVE PACKET SIZE= <value>
Warning
Installi.pm6 27.05.97, 12:5161