Operation Manual

Installing NetWare MultiProtocol Router for ISDN 3.1 59
Complete the steps described in this procedure to install NetWare
MultiProtocol Router for ISDN 3.1 on a local server/router. For online
help, press <F1>.
1. Load the INSTALL program by typyng the following com-
mand at the NetWare server system console prompt:
LOAD INSTALL <Enter>
The Installation Options menu appears.
2. From the Installation Options menu, select Product Options,
then press <Enter>.
If you are installing on an existing NetWare 3.12 server/router, a
list of the currently installed products (if any) is displayed.
If you are installing on an existing NetWare 4.1 server/router, a
menu labeled Other Installation Actions is displayed. Select the
View/Configure/Remove installed products option and press
<Enter>. A list of currently installed products (if any) is dis-
played.
3. To install a new product, press <Ins>.
4. Specify the correct path from which to load the source files.
Installing NetWare MultiProtocol Router for ISDN on a
Local Server
Procedure
Table 3-1:
Specifying INSTALL path names
Installi.pm6 27.05.97, 12:5159