Operation Manual

56 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
If you are installing any other Novell® products, do so before install-
ing the NetWare MultiProtocol Router for ISDN 3.1 software.
If you have the IPX
TM
Upgrade for NetWare Servers Beta software
running NLSP
TM
(NetWare Link Services Protocol
TM
) software in-
stalled anywhere on your network, you must upgrade those servers
to IPX Upgrade for NetWare Servers 1.1 . Do this before installing
NetWare MultiProtocol Router for ISDN 3.1 or IPX Upgrade for
NetWare Servers 1.1 software on any other server on the network.
Installation Setup
There are several options for installing NetWare MultiProtocol Router
for ISDN 3.1:
Type of installation:
♦ Local - Install to the local server.
♦ Remote - Install from a local server or client to a remote server.
Media type:
You can :
♦ Copy the NetWare MultiProtocol Router for ISDN 3.1 software to a
local DOS partition.
See below for instructions.
♦ Copy the NetWare MultiProtocol Router for ISDN 3.1 software to
the SYS: volume of a NetWare server.
See below for instructions.
♦ Mount the CD-ROM drive as a local DOS device and install
directly from CD-ROM.
♦ Mount the CD-ROM drive as a NetWare volume and install
directly from CD-ROM.
For information on mounting a CD-ROM drive as a NetWare
volume, refer to Appendix A of the NetWare MultiProtocol Router
3.1 Installation guide, "Mounting a CD-ROM as a NetWare Vol-
ume."
Installi.pm6 27.05.97, 12:5156