Operation Manual

54 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
Warning
With the initial hardware preparation completed, you are ready to
upgrade or install the NetWare operating system, as follows:
For information on upgrading from versions 2.0, 2.1, 2.11 and 3.0 to version
3.1 of the NetWare MultiProtocol Router for ISDN, refer to the special
upgrade manual coming with your upgrade product.
If your system already has NetWare 3.12 or NetWare 4.1 software installed,
you should go directly to Chapter 3, "Installing NetWare MultiProtocol
Router for ISDN 3.1."
Installation of the NetWare operating system is not described in this
Guide. You have to refer to the NetWare MultiProtocol Router 3.1
Installation guide for information on this topic. Afterwards, come
back to Chapter 3 of this Guide to install NetWare MultiProtocol
Router for ISDN 3.1 !
- If you want to install NetWare 3.12 Runtime for the first time, go
to "Installing NetWare 3.12" on p. 99 of the NetWare MultiProtocol
Router 3.1 Installation guide.
- If you want to upgrade an existing server/router from NetWare
3.x or NetWare 4.x to NetWare 4.1 (two-user version), go to
"Upgrading to NetWare 4.1" on p. 117 of the NetWare MultiProto-
col Router 3.1 Installation guide.
If your system has NetWare 3.x and NetWare MultiProtocol Router for
ISDN 2.x installed, upgrading to NetWare 4.1 will prevent NetWare
MultiProtocol Router for ISDN 2.x from functioning. Therefore, you
should always upgrade to NetWare 4.1 and upgrade to NetWare Multi-
Protocol Router for ISDN 3.1 at the same time. Do not terminate the
integrated INSTALL program after upgrading to NetWare 4.1. Refer to
the special upgrade note coming with your upgrade product for more
information on this topic.
- If you want to install NetWare 4.1 (two-user version) for the first
time, go to "Installing NetWare 4.1" on p. 113 of the NetWare
MultiProtocol Router 3.1 Installation guide.
Where to Go from Here
Note
Note
Preparin.pm6 27.05.97, 21:0854