Operation Manual

48 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
NetWare MultiProtocol Router for ISDN 3.1 can be installed on one
server with NetWare Connect for ISDN and NetWare Connect
version 1.0 and 2.0.
When installing NetWare MultiProtocol Router for ISDN 3.1 together
with NetWare Connect or NetWare Connect for ISDN 1.0, refer to the
NetWare MultiProtocol Router 3.1 Release Notes for information on
problems with a new version of CSL (p. 28), with the NetWare Link/
X.25 feature of NetWare Connect (p. 31) and with the version of
STREAMS.NLM (p. 33).
♦♦ AVM MPR for ISDN Router Manager
AVM´s MPR for ISDN Router Manager v1.0 can be used to manage
NetWare MultiProtocol Router for ISDN 3.1. However, you have to
use the latest version of the MPR for ISDN Router Agent. For more
information, please contact AVM.
If you are running NetWare MultiProtocol Router for ISDN 3.1 as a
combined server and router with other server-based products rather
than as a standalone router, several issues must be accounted for .
♦♦ NetWare OSI Transport for X.400
NetWare MultiProtocol Router for ISDN 3.1 does not work with
NetWare OSI Transport for X400, an add-on product to NetWare
Global Messaging
TM
software. Do not install NetWare MultiProtocol
Router for ISDN 3.1 software, if NetWare OSI Transport for X400is
installed on your system.
♦♦ NetWare for OS/2
NetWare MultiProtocol Router for ISDN 3.1 software is incompatible
with NetWare for OS/2. Do not install NetWare MultiProtocol
Router for ISDN 3.1 software on a NetWare for OS/2 server.
♦♦ NetWare SFT III
NetWare MultiProtocol Router for ISDN 3.1 software does not
operate on NetWare SFT III
TM
servers. Do not install NetWare Multi-
Protocol Router for ISDN 3.1 software on a NetWare SFT III server.
Preparin.pm6 27.05.97, 21:0848