Operation Manual

Preparing to Install 47
Interoperability Information
♦♦ Former Versions of NetWare MultiProtocol Router for ISDN
The NetWare MultiProtocol Router for ISDN was introduced on the
market at the end of 1992 with v2.0. NetWare MultiProtocol Router
for ISDN 3.1 is compatible with all former version, i.e. NetWare
MultiProtocol Router for ISDN v2.0, v2.1, v2.11 and v3.0. Of course,
you can only use the features provided in both versions running at
each end of the ISDN link.
Known items are for example:
Static routes/services, NLSP or Unnumbered IPX WAN links for an
IPX connection or Unnumbered IP WAN links for a TCP/IP connec-
tion cannot be used for connections between version 3.1 and ver-
sions 2.x.
The OSI protocol is not supported with NetWare MultiProtocol
Router for ISDN 3.1.
For D64S connections between version 3.1 and versions 3.0 and 2.x, a
special solution is required, which is not inlcuded as standard. For
more information, refer to the Technical Note on NetWare MultiProto-
col Router for ISDN 3.1.
For "Vorbestellte Dauerwählverbindungen" (semipermanent connec-
tions within 1TR6) between version 3.1 and versions 3.1, 3.0 and 2.x,
a special solution is required, which is not inlcuded as standard. For
more information, refer to the Technical Note on NetWare MultiProto-
col Router for ISDN 3.1.
♦♦ AVM NetWAYS/ISDN
AVM´s remote node software NetWAYS/ISDN was introduced to
the market in the beginning of 1993 with v2.0. You can use Net-
WAYS/ISDN v2.0, 2.1 as well as the latest version 3.0, which is
included with the NetWare MultiProtocol Router for ISDN 3.1, of
NetWAYS/ISDN to dial in to the LAN via NetWare MultiProtocol
Router for ISDN 3.1.
♦♦ NetWare Connect for ISDN / NetWare Connect
AVM´s NetWare Connect for ISDN was introduced to the market at
the end of 1994 with version 1.0.
Compatibility with Other Products
Preparin.pm6 27.05.97, 21:0847