Operation Manual

Preparing to Install 43
This chapter describes the system requirements and installation
procedures for NetWare® MultiProtocol Router
TM
for ISDN 3.1
software.
The NetWare MultiProtocol Router for ISDN 3.1 software can be
installed on either of the following platforms:
- NetWare 3.12 or NetWare 4.1, as a combined router and server
- NetWare 3.12 or NetWare 4.1, as a dedicated router
You must install or upgrade to NetWare 3.12 or NetWare 4.1 before
you install the router software.
NetWare 3.12 Runtime
TM
software (a special two-user version) and
NetWare 4.1 (also a special two-user version) software are included with
the NetWare MultiProtocol Router for ISDN 3.1 software; you do not have to
purchase them separately.
The NetWare 4.1 platform does not provide backward compatibility for
NetWare MultiProtocol Router for ISDN 2.x software.
This chapter describes preparations that must be made prior to
installing NetWare 3.12 Runtime (or NetWare 4.1) and NetWare
MultiProtocol Router for ISDN 3.1 software. It contains the follow-
ing sections:
- "What you need" on page 43
- "Setting Up the Hardware" on page 51
- "Where to Go from Here" on page 54
Preparing to Install
2
c h a p t e r
Hardware Requirements
What You Need
You need the following hardware to install MultiProtocol Router for
ISDN 3.1:
Note
Checklist
Warning
Preparin.pm6 27.05.97, 21:0843