Operation Manual

Introduction to NetWare MultiProtocol Router for ISDN 3.1 41
Product Versions
synchronous or asynchronous communication lines with the PPP
implementation to interconnect LANs.
NetWare Mobile IPX:
Novell´s NetWare Mobile IPX software is also provided with Net-
Ware MultiProtocol Router for ISDN 3.1. It consists of router and
mobile client components that work in concert to shield users from
the protocol and network-layer interruptions that occur when a user
changes network interfaces or locations during a network session.
For information on this option, refer to the NetWare MultiProtocol
Router 3.1 manuals which are provided as a hard copy and on CD-
ROM.
The NetWare MultiProtocol Router for ISDN 3.1 is available in the
following versions:
- 2 BRI for up to four ISDN ports,
- 4 BRI for up to 8 ISDN ports, and
- PRI for up to 36 ISDN ports
Upgrade products are available for former versions of NetWare
MultiProtocol Router for ISDN (v2.0, v2.1, v2.11 and v3.0) as well as
within the current version (2 BRI -> 4 BRI; 2 BRI/4BRI -> PRI). For
upgrading information, refer to the special note included with your
upgrade product.
Configuration and Management
With NetWare MultiProtocol Router for ISDN 3.1, first-time installa-
tion and configuration becomes easier for standard WANs. It offers
several preconfigured scenarios for both IPX and TCP/IP that
should apply for most standard network environments. You simply
select the file that most closely fits your network and copy it to the
router. Then, you have to enter ISDN and network numbers - and
that is it.
Introduc.pm6 27.05.97, 21:0341