Operation Manual

System and Error Messages 269

0x330C Re-establish connection, B channel layer 3 [#330C].

An existing connection or a call set-up in progress was aborted and

had to be re-established. Data loss may have occurred. Possible

causes include:

- the remote TE called does not conform to the protocol or service

definition

- an interrupted connection is being resumed (not currently imple-

mented).

ISDN Line Management Messages

Messages Indicating Actions or Status Changes

All the following messages are displayed as follows:

<Date> <Time> <Board Name_Interface Number>:

Example:

95/06/10 13:29:50 AVM-B1_1: Connection to 03046707219 subaddress

1 established (outgoing).

Incoming call from <Number>.

indicates that a call is coming in from the specified ISDN number.

Create connection to <Number>.

indicates that a connection to the specified ISDN number is initiated.

Connection to <Number> established (incoming).

indicates that an incoming call request has been accepted and a

physical ISDN connection has been established to the specified ISDN

number.

Connection to <Number> established (outgoing).

indicates that an outgoing call request has been accepted by the

remote site and a physical connection has been established to the

specified ISDN number.

Meldunge.pm6 27.05.97, 21:06269