Operation Manual

268 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
0x3308 Connection to ISDN aborted (B channel) [#3308].
An existing connection to the remote station was terminated. Possible
causes include:
- an unstable ISDN connection to the NT, possibly caused by:
- excessive cable length
- incorrect cable routing
- faulty wiring connections.
0x3309 Connection to ISDN aborted (B channel) [#3309].
An existing connection or a call set-up in progress to the remote
station was terminated. Possible causes include:
- termination of call set-up by the user
- the remote TE called does not conform to the protocol or service
definition.
0x330A Connection to ISDN aborted (B channel) [#330A].
An existing connection or a call set-up in progress to the remote
station was terminated. Possible causes include:
- user termination of call set-up
- the remote TE called does not conform to the protocol or service
definition
- the remote TE called uses an incompatible Layer 3 protocol.
0x330B Connection to ISDN aborted (B channel) [#330B].
An existing connection or a call set-up in progress was aborted and
had to be re-established. Data loss may have occurred. Possible
causes include:
- the remote TE called does not conform to the protocol or service
definition
- an interrupted connection is being resumed (not currently imple-
mented).
Meldunge.pm6 27.05.97, 21:05268