Operation Manual

258 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
Figure 18-8:
ISDN Console, Options menu
Table 18-8:
Configurable Parameters in the "Options" Menu
Parameter Description
Screen Update Interval specifies how often ISDN Console screens are updated.
Trace Level lets you define the level of the trace. Network Protocol: all IPX, IP, AT, etc.
protocols are traced. ISDN D channel: traces ISDN D channel information.
PPP Protocol: traces information related to the PPP protocol.
Trace with Hex Dump lets you enable Trace with Hex Dump.
Trace Dropped Packets lets you exclude dropped packets from packet trace. Disabled: dropped
packets are not traced. Enabled: dropped packets are traced.
Trace Packet Slice lets you specify the slice of the packet to be traced. If you want to trace the
packet headers only, specify 64 Bytes. 0 Bytes traces full packets. The
header sizes for the single protocols are as follows:
IPX: 30 Bytes IP: 20 Bytes
SPX: 42 Bytes UDP/IP: 28 Bytes
NCP: 36 Bytes TCP/IP: 40 Bytes
SPX II: 44 Bytes ARP/RARP: 28 Bytes
MONITORI.PM6 27.05.97, 23:52258